Diamond Drop®
Super hydrofobowa powłoka kwarcowo - ceramiczna
Well-known ceramic coating applied successfully on thousands of cars around the world. It’s nano particles create hydrophobic, durable and a high gloss protection layer.

Capacities
Amount of the product is adjusted to most typical usage. If you need any other capacities, please contact us at sales@tenziprodetailing.com.pl
Features
To help you see the usefulness of the product we managed to evaluate its characteristics in a group of features with five-level scale
- Method of use
- Quick advice
- Important
How to apply the product:
Shake bottle well before use and wait 3 minutes before opening.
Wrap small cloth around soft-side of the applicator.
Apply few drops of Diamond Drop® onto applicator covered with small cloth.
Apply thin and even layer onto one paintwork section.
Leave the layer on the surface for approx. 3-5 minutes (bonding time).
Buff the surface with microfiber towel to a high gloss.
Move to next paintwork section. Attention: Do not apply Diamond Drop® to hot surfaces or in direct sunlight.
It is good to know that:
If you want to know if the product is ready to buff, first try to move a hanging towel over drying coating. If the towel slides easily then wait a few minutes until the surface will start to slow it down.
For best results put up to 3 layers of the product with minimum time interval of 3 hours.
What you need to know
Use thin rubber protective gloves.
Apply indoor only with temperature of 18-24 C.
Make sure the car paint is clean and cool.
Degrease and remove old coatings from car paint before application.
Apply additional layers with minimum time interval of 3 hours.
Drying time after application of last layer - 8 hours.
Download Zone
If you don’t see here necessary files, please let us know!

Find the nearest reseller
See where you can buy our products or find a nearest detailing studio using them.
Check the map