Q7 – Crystal

Super hydrophobic crystal gloss permanent quartz paint coating

Well-known ceramic coating applied successfully on thousands of cars around the world. It’s nano particles create hydrophobic, durable and a high gloss protection layer.

Capacities

Amount of the product is adjusted to most typical usage. If you need any other capacities, please contact us at sales@tenziprodetailing.com.pl

50 ml 250 ml

Features

To help you see the usefulness of the product we managed to evaluate its characteristics in a group of features with five-level scale

Hydrophobicity
Color enhancement
Durability
Slickness
Gloss
Hardness

How to apply the product:

1

Shake bottle well before use and wait 3 minutes before opening.

2

Wrap small cloth around soft-side of the applicator.

3

Apply few drops of Q7 Crystal onto applicator covered with small cloth.

4

Apply thin and even layer onto one paintwork section.

5

Leave the layer on the surface for approx. 3-5 minutes (bonding time).

6

Buff the surface with microfiber towel to a high gloss.

7

Move to next paintwork section. Attention: Do not apply Q7 to hot surfaces or in direct sunlight.

It is good to know that:

If you want to know if the product is ready to buff, first try to move a hanging towel over drying coating. If the towel slides easily then wait a few minutes until the surface will start to slow it down.

For best results put up to 3 layers of the product with minimum time interval of 3 hours.

What you need to know

1

Use thin rubber protective gloves.

2

Apply indoor only with temperature of 18-24 C.

3

Make sure the car paint is clean and cool.

4

Degrease and remove old coatings from car paint before application.

5

Apply additional layers with minimum time interval of 3 hours.

6

Drying time after application of last layer - 8 hours.

Download Zone

If you don’t see here necessary files, please let us know!

globe

Find the nearest reseller

See where you can buy our products or find a nearest detailing studio using them.

Check the map