R1 – Rims
Nano-ceramic coating for rims. Dedicated for chrome, aluminum and paint-coated rims.
Super hydrophobic effect and protection from water, dust, salt and UV-rays. Increased protection against scratches. Extra hard ceramic self-cleaning rims’ protection. It is also resistant to high temperatures created during braking.
The fastest way for permanent protection of every kind of rims: both painted and polished. It gives a superb hydrophobic effect that lasts for months.
Amount of the product is adjusted to most typical usage. If you need any other capacities, please contact us at email@example.com
To help you see the usefulness of the product we managed to evaluate its characteristics in a group of features with five-level scale
How to apply the product:
Shake bottle well before use and wait 3 minutes before opening.
Wrap small cloth around soft-side of the applicator.
Apply few drops of R1 onto applicator covered with small cloth.
Apply thin and even layer onto rim.
Leave the layer on the surface for approx. 7-8 minutes (bonding time).
Buff the surface with microfiber towel to a high gloss.
Move to next paintwork section. Attention: Do not apply R1 to hot surfaces or in direct sunlight.
It is good to know that:
If you want to know if the product is ready to buff, first try to move a hanging towel over drying coating. If the towel slides easily then wait a few minutes until the surface will start to slow it down.
For best results put up to 3 layers of the product with minimum time interval of 3 hours.
What you need to know:
Use thin rubber protective gloves.
Apply indoor only with temperature of 18-24 C.
Make sure the surface is clean and cool.
Degrease and remove old coatings from the glass before application.
Apply additional layers with minimum time interval of 3 hours.
Drying time after application of last layer - 8 hours.
Do not expose the car to water for 24 hours after coating.
Find the nearest reseller
See where you can buy our products or find a nearest detailing studio using them.Check the map